|
Kleerwater oil water separators
are gravity fed separators which uses a patented ball technology to enhance
oil separation. Kleerwater separators also use a patent pending inlet flow
system. These technologies together, provide our separator with performance
qualities which outperform all of the current gravity fed separators on the
market.
The Kleerwater separator is capable of handling twice the inlet flow of
most separators on the market, which allows the Kleerwater tank to be smaller
than all of the other separators. The smaller tank allows for less expensive
separator and less expensive installation costs.
Most
separators on the market only reduce effluent oil concentrations to 10-15
parts per million. The Kleerwater separator has been tested by UL and rated
to reduce effluent oil concentrations to less than 5 parts per million. This
means the Kleerwater separator with its patented balls and inlet system
reduces the effluent by at least 50% over other separators on the market.
The Kleerwater separator provides better reduction in oil, which is good for
both you and the environment.
Most separators on the market are very difficult to clean and maintain.
The Kleerwater separator can be cleaned and maintained from the surface.
This means no more dangerous, not to mention costly, confined space tank
entries for the maintenance crews. The Kleerwater separator is designed to
allow for oil removal, ball cleaning, and sludge removal to be done above
ground. This reduces the amount of time it takes to service the separator,
reduces the cost involved with servicing the separator, and it increases the
safety for the people servicing the unit. All of these things result in cost
savings for you.
|
